Omni-Rig - Elecraft K3 fixes

 

See blog post here, but Omni-Rig doesn't handle data modes well on the Elecraft K3 (and presumably the K3, KX2 and KX3). 

Here are some fixes to the Omni-Rig .ini files that will help

For Data Mode A:

[pmDIG_U]
Command=(MD6;DT0;)
ReplyLength=0

[pmDIG_L]
Command=(MD9;DT0)
ReplyLength=0

For Data AFSK_A

[pmDIG_U]
Command=(MD9;DT1;)
ReplyLength=0

[pmDIG_L]
Command=(MD6:DT1;)
ReplyLength=0

(The above commands were provided to me by Joe, W4TV)

From the Elecraft K3 CAT manual here:

SET/RSP format: MDn; or MD$n; where n is 

1 (LSB)

2 (USB)

3 (CW)

4 (FM)

5 (AM)

6 (DATA)

7 (CWREV)

9 (DATA-REV)

SET/RSP format: DTn; where n is the data sub-mode last used with VFO A, whether or not DATA mode is in effect: 

0 (DATA A)

1 (AFSK A)

2 (FSK D)

3 (PSK D)